Aquarium RO System with Built in Pressure Gauge
Removes up to 99% of all impurities - including silicates - for a clean, clear aquarium
Aquarium RO system
Clean, pure water is a priority for all fish. No equipment is more effective in helping create ideal water conditions than Reverse Osmosis (RO) units. These units filter out up to 99% of chemicals found in tap water.
Our Aquarium RO Systems meet stringent standards. A wide variety of options ranging from economy 3-stage units to top of the line 5-stage RO/DI units are available to suit your exact needs.
Build-in Pressure Gauge
The minimum operating pressure for a RO (reverse osmosis) unit is 50 psi (pounds per square inch). This unit build-in pressure gauge to monitor the operating pressure of the system. If the operating pressure is too low, an RO pressure boosting pump can be added to increase the operating pressure to the ideal range.
Why do I need RO water?
Tap water contains impurities that cause problems when added to an aquarium. These include phosphate, nitrate, chlorine, and various heavy metals. High levels of phosphate and nitrate fuel aggressive algae growth, and copper, often present in tap water due to leaching from pipes, is highly toxic to invertebrates. Because RO filters remove practically all of these impurities, they are essential for aquarists, particularly marine hobbyists. (please click here for more information)
- Reverse Osmosis Technologies
- Easy to Use and Store
- Three Color Coded Tubing For System Connection.
- Include Common Faucet Adaptor For Easy Installation.
- 100% Factory Tested and Sterilized.
- Include Installation Instruction.
- Pressure Gauge
Production: 50 GPD / 189 LPD
Minimum Operation pressure: 50 psi
Dimensions: (cm)28 (L) x 35 (H) x 15 (W) - system
Weight: 4.8 kg - system
Replacement Cartridge Filters - FS301
(Stage 1) 5 Micron Sediment Filter:
It is effective in removing dirt, rust and sand particles.
(Stage 2) Carbon Block Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odour, and color. Protect and prolong the life of membrane.
(Stage 3) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It removes the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.